Archive for the Category »SmartMeter «

The GodFather of Energy Efficiency

A group of prominent scientists has proposed that “the Rosenfeld,” a unit for electricity savings, be named after Bay Area physicist Arthur Rosenfeld.

The 83-year-old Berkeley resident is known as the “godfather” of energy efficiency and served on the California Energy Commission from 2000 to January this year.

“The Rosenfeld” would be defined as electricity savings of 3 billion kilowatt-hours per year, the amount needed to replace the annual generation of a 500-megawatt coal-fired power plant. Rosenfeld often uses the example of power plants when explaining the benefits of energy efficiency to students.

A lazy man’s guide to cutting energy costs

Not sure why people here in Singapore aren’t that crazy about measuring energy usage.  People here prefer to spend more on air-conditioner than considering other factors.

Singaporeans also like to complain about the tariffs hike, but do near to nothing when trying to conserve energy use.

Not like in places where they place sensors and controllers within the house to measure peak, off peak and usage patterns to reduce energy cost.

Best way is to follow A lazy’s man guide to cutting energy costs.

Types of Gas and Electricity Tariffs

This energy tariffs buyers’ guide outlines the different types of energy tariff available.
You buy gas and electricity in kilowatt hours (kWh) – this is what you’ll see on your bill.

Gas tariffs

Gas tariffs are often at two rates. You might pay 4p for the first 5,000 kWh each quarter, say, and then a lower figure, 2.5p for instance, for each subsequent kWh.
Because suppliers charge different rates, you can lower your gas bills by switching to the tariff that’s best for your own use.

Electricity tariffs

Electricity tariffs work in a similar way, although the pricing is different. You might pay 24p for the first 125 kWh each quarter, say, and then 10p for each subsequent kWh.
Because suppliers charge different rates, you can lower your electricity bills by switching to the best tariff for you.

Dual fuel tariffs

Dual fuel tariffs work the same way as gas and electricity tariffs. However, suppliers give discounts for taking both products from them.

For many people, the discounts mean that a dual-fuel tariff – switching both gas and electricity to the same supplier – works out cheapest.

Green tariffs

With green tariffs, you still get the same gas and electricity. The tariffs work in several ways – but many match energy you use against supplies from renewable sources.
Once you’ve compared gas and electricity prices with us, you can choose to compare just green tariffs.

Online tariffs

Some of the cheapest tariffs are online only. You don’t get a paper bill, but you manage your account over the internet instead – making payments, giving meter readings and so on.

The advantage of giving meter readings online is that you know you won’t over or underpay, compared with a company estimate. Plus you don’t have to wait around for the meter reader.
Once you’ve compared gas and electricity prices with us, you can choose to see just online tariffs.

Tariffs with rewards

As well as cheaper gas and electricity prices, you can also benefit from rewards with some companies – there’s often a reward for signing up and more rewards depending on your bill.
Once you’ve compared gas and electricity prices, you can choose to see just tariffs with rewards.

Fixed and capped tariffs

With fixed-rate tariffs, the price is guaranteed not to change for a certain period. With capped tariffs, it won’t go above a certain level.
These accounts help you budget – you know the exact or maximum amount you will pay.
The downside is that these tariffs are a little more expensive than standard ones, and you won’t benefit fully (at all with fixed-price tariffs) from future falls in energy prices (if there are any).
These tariffs are often for a set period – you’ll pay a fee if you want to switch within the set time.

Economy 7

With an Economy 7 meter, you pay less for electricity you use off-peak (between midnight and 7am), but more during the day. They’re commonly used with storage heaters.
If you have one, use timers to run washing machines, dishwashers and so on at night.

Prepayment meters

Prepayment tariffs are the most expensive way to pay for gas or electricity.
You pay in advance for what you’re going to use, by charging up your key or card at prepayment outlets.
To change to a cheaper way of paying, such as direct debit, you’ll need to have the meter physically changed. You may have a credit check run on you as well.

New project using Google Spreadsheet & Core Data

Halfway through a new project that uses Google Spreadsheet & Core Data.

SmartMeter updates uses Google Spreadsheet to export meter readings & tariffs to user google docs account.  Started using the Core Data APIs for this next project to have clean and easier way to manage persistent data.

Tariffs for SmartMeter

Just receive a request to support a new tariff policy from a user in Malta. This set me thinking on more ways to support different tariff structure that utility providers impose on their customers.

Some tariffs structure is simple. You pay for what you use. The difference between 2 readings is the usage over time. Times the standard tariff rate and you get the consumption for the period between the 2 readings.

Other utility providers offer day and night or peak and off peak rates. Some others do offer seasonal rates for summer and winter where demand is much higher. Another way is to have a band of rates to cater for higher usage.

Therefore, I am trying to understand these different tariff policies to make SmartMeter even better.

Why you should read your own meters

When you receive an estimated bill, you should check the service  provider’s estimates with your meter reading. The new export feature allows you export the readings as a spreadsheet to google docs.

If the two readings vary greatly then you may wish to submit your readings to the service provider for  clarification.

It enables billing you to a reading based on your actual usage as opposed to an estimate. This may have the effect of reducing fluctuations between actual and estimated bills.

Monitoring your own meter readings allows you to view usage pattern and identify if any sudden increases occur, rather than having to wait until the next actual reading from your provider.

THE PROBLEM
•    Meter readings are taken once every two to three months by your provider. For other months, estimated readings are used to compute your bills.
•    Billing from your provider does not include current charges to date or projected monthly charges.
•    Billing cycles usually overlap the calendar month and this makes budgeting for utilities difficult.

THE SOLUTION
•    Regular self meter reading complements and validates the billing from your provider.  You  can submit these readings to be rectified so that you are charged according to actual usage.
•    Current and projected monthly charges calculated by this application allows you to forecast monthly utility expenses and budget accordingly.
•    Constant reading also helps you track consumption habits and monitor the energy efficiency of electrical appliances.  By modifying consumption habits and using green appliances, you can reduce resource usage and save money at the same time.

How to read your meters

The electricity meter measures the amount of electricity you have used in kilowatt-hours (or units). For SmartMeter, you should read the black numbers and the single red number on your meters.

Reading : 5083.5

If you subscribe to gas, you would have a gas meter outside your home. It registers your gas consumption in units equivalent to a heat value of one kilowatt hour. For SmartMeter, you read the black numbers and the first red number on the meter.

Reading : 16991.0

The water meter measures the amount of water in cubic meters. Read only the first five numbers from the left. You will notice that these are the first four numbers in black and the fifth number in red on your meter.

Reading : 3402.6

SmartMeter 1.1 released

SmartMeter 1.1 for sale at new reduced price of US$0.99.  New feature is exporting readings, tariffs, consumption & billing as a spreadsheet to goggle docs.